ENDY 6200

Endodontic Micromotor + Apex Locator

BUY NOW

The Endy 6200’s strengths

Endy-6200

A fully digital measurement
The signal emitted by Endy 6200 is fully digital. There is no deviation or change in the precision of the IONYX apex locator over time.

Constant speed and torque
Speed remains constant regardless of the force applied to the file in the root canal.
Torque is continuously controlled to preserve files.

An isolated internal sensor in the contra-angle handpiece
When file is inserted in the contra-angle handpiece, the measurement sensor is automatically connected. The PEEK contra-angle guarantees a fully isolated measurement signal.

Ultimate Visibility
Small compact head for greater visibility.

Mode of Operation
“Mode” key enable selection of three operating modes – Auto (green), Run (yellow) or Apex Over (orange).

“Auto” mode: Automatic rotation, Apex auto-reverse (buffer), Torque auto-reverse.
Enter the pulp cavity, the micro-motor starts automatically.
When torque limit is reached file will auto-reverse.
Progression of your file towards the apex is shown by the luminous bar representing a canal.
Arrival at the buffer, the file stops automatically; if the end of the file is at the buffer or beyond for one and a half seconds, the rotation switches to slow reverse.

“Run” mode : Forced rotation, Apex auto-reverse (buffer), Torque auto-reverse.
The file rotates immediately outside the pulp cavity. Slowly enter the canal without force on the instrument
When torque limit is reached the file will auto-reverse.
To change file and go to the next in sequence, pressing the «V» will stop the motor
To start motor again, press the «Λ» key for 1 second.
The progression of your file towards the apex is shown by the luminous bar representing a canal.
Arrival at the buffer, the file stops automatically; if the end of the file is at the buffer or beyond for one and a half seconds, the rotation switches to slow reverse.

“Apex over” mode: Automatic rotation, no stopping at the Apex (buffer), Torque Auto- reverse.
On entry to the pulp cavity, the micro-motor starts automatically. Progress slowly in the canal without force on the instrument.

When torque limit is reached the file will auto-reverse.
Start the sequence again or go to the next sequence (file change). The progression of your file towards the apex is shown by the luminous bar representing a canal.

This mode does not stop the rotation at the apex (the buffer light is off).

This mode should be used with caution

Endy 6200 presentation